Analysis of the three major problems of universal material testing machine

Analysis of the three major problems of universal material testing machine

  Established in 2009, Taian Tiancheng Testing Equipment Co., Ltd. is a new-type technology enterprise integrating design, research and development, production and sales, after-sales maintenance, import and export trade. The company is located in the west of Tai'an, 5 km west of Tai'an Station.

 Since the establishment of our company, we have continuously innovated and researched R&D, and have passed the EU CE certification and ISO9001 quality system certification. Our products cover all parts of the country and are exported to Korea, Japan, Malaysia, Vietnam, Philippines, Myanmar, Thailand, Indonesia, Angola and Saudi Arabia. , Congo, Spain, Germany, Austria, Peru, the United States and other countries.

  In the daily operation, there are many problems in the universal material testing opportunities. There are three common types, and then we will use the elimination method to teach everyone to judge. I hope everyone can learn from it:

1. After the computer software is online, the message box appears to be overloaded.

Computer software online after the prompt box according to information overload.

  Method of exclusion:

Check if the communication line between the computer and the test machine is off; check if the online selection sensor is selected correctly; check if the sensor has been hit during the most recent test or keyboard operation; check whether the software calibration or calibration function is used before the problem occurs; check whether it is manual Changed other information in calibration values, calibration values, or hardware parameters.

2. The power of the test machine host is not bright, and the device cannot move up and down.

Tester host power supply is not bright, equipment can not move up and down.

  Method of exclusion:

Check whether the power supply line connected to the test machine is connected properly; check whether the emergency stop switch is in the screwed state; check whether the power supply voltage of the test machine is normal; check whether the fuse on the machine socket is blown, please remove the spare fuse and install it. .

3. The main power of the test machine is powered, and the device cannot move up and down.

Testing machine the host has electricity, power supply equipment can not move up and down.

  Method of exclusion:

Check whether the device can not be moved after 15S, because the host needs self-test after booting, it takes about 15S time; check whether the upper and lower limits are in the proper position, have a certain running space; check whether the power supply voltage of the access test machine is normal.

Universal material testing machine use problem analysis:

In the daily operation, there are many problems in the electronic universal test opportunity. The following are common ones, and then the exclusion methods are given separately. I hope everyone can learn from it:

1. After the computer software is online, the message box appears to be overloaded.

  Method of exclusion:

Check if the communication line between the computer and the test machine is off; check if the online selection sensor is selected correctly; check if the sensor has been hit during the most recent test or keyboard operation; check whether the software calibration or calibration function is used before the problem occurs; check whether it is manual Changed other information in calibration values, calibration values, or hardware parameters.

2. The power of the test machine host is not bright, and the device cannot move up and down.

  Method of exclusion:

Check whether the power supply line connected to the test machine is connected properly; check whether the emergency stop switch is in the screwed state; check whether the power supply voltage of the test machine is normal; check whether the fuse on the machine socket is blown, please remove the spare fuse and install it. .

3. The main power of the test machine is powered, and the device cannot move up and down.

  Method of exclusion:

Check whether the device can not be moved after 15S, because the host needs self-test after booting, it takes about 15S time; check whether the upper and lower limits are in the proper position, have a certain running space; check whether the power supply voltage of the access test machine is normal.

Based on the enterprise spirit of “Quality creates brand, service seeks development”, the company constantly innovates and strives to build a after-sales team with exquisite technology and high quality service to spare customers from worries. We sincerely hope to cooperate with colleagues from all walks of life to create brilliant future. !